Diloti

Diloti is a Greek fishing game for two players (or four players in partnerships). It plays similarly to another Greek fishing game, Kontsina. However, it also incorporates bonuses for capturing all the cards in one fell swoop, as in Xeri. This, along with the ability to form cards into sets that can only be captured together, makes Diloti one of the most strategic games in the fishing family.

Object of Diloti

The object of Diloti is to capture as many cards as possible. Cards are captured with a card matching them in rank, or by using one card from the hand to capture a combination of cards that add up to its rank. Particular attention is given to capturing all the cards on the table on one turn, which scores higher.

Setup

If you want to play Diloti, you’ll need a standard 52-card deck of playing cards. If you want to give your players the best Diloti game ever—and who doesn’t?—you’ll need a deck of Denexa 100% Plastic Playing Cards. You also need something to keep score with, like pencil and paper or a smartphone app. You can also use a Cribbage board.

If you’re playing with four players, determine partnerships by some convenient method like high-card draw, or simply mutual agreement. Partners should be seated across from each other, so that as the turn progresses around the table players from alternating partnerships get a turn.

Shuffle and deal six cards to each player. Then, deal four cards face up to the center of the table. If three or more of these cards are the same rank, shuffle all four of them back into the deck and deal four new cards. Place the stub next to these four cards, forming the stock.

Game play

The player to the dealer’s left plays first. On each turn, a player plays a single card from their hand. If it doesn’t match with anything else on the table, they simply play it face-up to the table. This is called laying the card. If possible, however, a player will try to capture cards from the table, since this is how points are scored.

Capturing cards

A player may form one or more cards on the table into a bundle that must be captured as a single unit. This bundle is known as a declaration. For example, with a 2 and a 3 on the table, a player may play a 5 and form all three cards into a declaration with a value of 10. This declaration would only be able to captured on a later turn with a 10. Note that because face cards have no defined value, they cannot be included in a declaration. To avoid ambiguity, it is customary to state the value of the declaration when forming it. The declaration should be formed into a pile on the table, with all indices visible, to denote it can only be captured as a unit, as well as allowing players to see its value.

A player can also capture multiple cards by playing a card whose rank is equal to the total of the values of the cards being captured. For example, with a 5 and a 3 on the table, playing an 8 will capture both cards. Cards’ values are equal to their pip value; face cards have no value. If multiple combinations of cards add up to the card played, all of them can be captured at once. For example, if there are an 8, 6, 5, 3, and 2 on the table, an 8 could capture all five cards (8 alone, 5+3, and 6+2).

When a player captures cards, they place them, as well as the card used to capture them, face down in a pile in front of them. (In the four-player game, each player shares a captured-cards pile with their partner.) No player can inspect these cards for any reason until the end of the hand.

Regular declarations

A player may form cards on the table into a bundle that must be captured as a single unit. This bundle is known as a declaration. For example, with a 2 and a 3 on the table, a player may play a 5, then group all three cards into a declaration with a value of 10. This declaration would only be able to captured on a later turn with a 10. Note that because face cards have no defined value, they cannot be included in a declaration. To avoid ambiguity, it is customary to state the value of the declaration when forming it.

After a declaration has been formed, any player can capture it if they have a card of a proper value. An opponent may also raise the declaration by adding an additional card to it, thus increasing the value of the card needed to capture it. A player cannot raise their own declaration or one formed by their partner. Of course, a player cannot raise the value of a declaration above 10, because no single card in the deck has a value greater than 10.

To form a declaration, a player must have a card in their hand that can capture it. Likewise, to raise a declaration, the raising player must hold a card with the new value of the declaration. The player that formed or raised the declaration cannot use the card for any other purpose but capturing the declaration (unless it is captured or raised by another player). After forming a new declaration, a player cannot lay cards, nor form new declarations until the existing declaration is captured (either by themselves or someone else) or raised by an opponent. This restriction passes to an opponent who raises a declaration already on the table.

Group declarations

A more complex type of declaration is the group declaration. A group declaration is a set of multiple single cards or bundles of cards, where the value of each set is equal. For example, with a 2, 6, and two 4s on the table, a player could make a group declaration with a value of 8 (the first set being 2+6 and the second being 4+4). Later, all four cards could be captured by playing an 8. When forming a group declaration, a player should state that they are doing so by stating “group of 8s”. This avoids ambiguity regarding the type of declaration being made.

The real power of a group declaration is that it can incorporate existing regular declarations as one of the sets. For example, Alpha creates a declaration of 7 by playing a 3 onto a 4. The next player, Bravo, raises the declaration to 9 by adding a 2 to it. Then they combine it with another 9 on the table to make a group declaration. Bravo (or any other player) could then capture all four cards with another 9.

A player is permitted to incorporate an existing regular declaration that they are obliged to capture into a new group declaration. This is the only way a player can form a new declaration while they already have a uncaptured declaration on the table. A player may also incorporate their partner’s declaration into a group declaration. All of the same restrictions that apply to a player with a pending regular declaration apply to a player that has formed a group declaration as well.

Capturing xeri

Beginning on the second turn of the hand, when a player plays a single card that captures every face-up card on the table, they are said to have captured those cards xeri (an Greek word meaning “plain” or “dry”). A xeri capture scores more points than cards captured otherwise. Because of this, a good deal of the strategy in Diloti involves blocking your opponents from getting xeris, while seizing any opportunities your opponent may leave open to get one.

To record a xeri, the player places one card from the batch captured face up and at right angles to the rest of the their won-cards pile.

Replenishing the hands

After six turns, the players will have run out of cards. The dealer then deals every player a new hand of six cards from the stock. Play continues as before.

When the last batch of cards has been dealt from the stock, the game continues until all the cards have been played. This ends the hand. The last player to capture cards takes any cards remaining on the table and adds them to their won cards. (This does not count as a xeri.)

Scoring

After the hand ends, each player or partnership looks through the cards in their won-tricks pile and totals up their score for the hand, as follows:

  • Ten points for each xeri
  • Four points for capturing the most cards. If both players or teams tie at 26 cards, neither side scores these four points.
  • Two points for capturing the 10♦
  • One point for each ace captured
  • One point for capturing the 2♣

The scores are recorded on the scoresheet, the deal passes to the left, and another hand is played. Game play continues until a player or partnership reaches a score of 61 or higher. Whichever side has the higher score at that point wins the game.

See also

Facebooktwitterredditpinterestlinkedintumblrmail

Seven Rummy (Seven Bridge)

Seven Rummy is a rummy game played in Japan. It’s also known as Seven Bridge, despite the fact that it has no trick taking, bidding, or any other characteristic of Bridge. It can be played by two to five players. What makes Seven Rummy unique among rummy games is the unusual role 7s play in the game. Any meld containing a 7 doesn’t have to contain three cards; it can have two, or even just one!

Object of Seven Rummy

The object of Seven Rummy is to be the first player to form their entire hand into melds.

Setup

Seven Rummy uses the standard 52-card deck. You can play with any 52-card deck, but to give your players the best that they deserve, insist on Denexa 100% Plastic Playing Cards. You also need pencil and paper or some other way of keeping score.

Shuffle and deal seven cards to each player. Place the stub face down in the center of the table, forming the stock. Turn over the first card of the stock. This card, the upcard, is the first card of the discard pile.

Game play

The player to the dealer’s left goes first. A Seven Rummy player’s turn follows the usual Rummy pattern of draw, then meld, then discard. A player normally draws from the stock—unlike in other rummy games, in Seven Rummy, there are some restrictions on when a card can be drawn from the discard pile, described below. After drawing, a player may lay any melds they can form face up on the table in front of them. Then, they discard a card face up onto the discard pile, and their turn ends. The turn then passes to the left.

Melding

Organizing their hands into melds is the goal of every player. There are two types of melds. The first is three or four of a kind. The other meld type is the sequence, which is three or more consecutive cards of the same suit, such as 4-5-6♣. For the purposes of sequences, cards rank in their usual order, with aces always low.

A player may lay down as many melds as they are able to on their turn. (However, if a player is able to meld all seven cards at once, they score double for the hand.) If a player can extend another player’s meld on the table using cards from their own hand, they may also lay off cards onto those melds.

Including a 7 in a meld waives the normal minimum-card requirements for that meld. A 7 may be melded by itself. It can also be part of a two-card sequence (like 6-7♦) or part of a pair (like 7♥-7♠).

Drawing from the discard pile

Normally, a player is only allowed to draw from the stock, not the discard pile. However, there are two situations in which a player can draw the top card of the discard pile instead. Both of them require a player to be able to immediately form a new meld with cards from their hand. Also, in both cases, a player must have already had at least one turn where they drew a card from the stock.

If a player can use the previous player’s card along with one or more cards from their hand to form a new sequence, they can do so. They must meld it immediately. They may then lay down any other melds they have in their hand and discard. The turn then passes to the left, as normal.

If a player discards a card that another player can use to form a new three or four of a kind, that player may draw the card immediately, even if it’s not their turn. As with a sequence formed with a discard, the meld must be laid on the table immediately. The player can then lay down any other melds, as desired, and discards to end their turn. The next player to the left still plays next, not the player whose turn would have been next had the active player not interrupted—this often results in players getting skipped.

If two players can draw and meld the same discard, the player melding the three or four of a kind has priority.

Ending the hand

The hand ends when a player has no cards left in their hand after melding and discarding. (A final discard is always required.) This player wins the hand. All of the other players total up the value of the deadwood left in their hands, as follows:

  • 7s—20 points each
  • Face cards—10 points each
  • All other cards—their pip value

The winner of the hand scores the total of all of the other players’ deadwood scores. If a player goes out without having previously melded any cards at all (i.e. they melded all seven cards at once, then discarded), they score double for that hand.

The player to the left of the dealer becomes the new dealer for the next hand. Game play continues until a predetermined stopping point, either a certain number of hands or a target score. Whoever has the highest score at that point wins the game.

Facebooktwitterredditpinterestlinkedintumblrmail